4
5
Your installation is completed.
(Optional/Recommended) To secure your network, press the
Simple Connect button (on the bottom) for two seconds on one
of the adapters. The Power LED will start to blink. Then, within
two minutes, press the Simple Connect button on the other
adapter for two seconds. Once the Power LEDs stop blinking,
verify that the PowerLine LED is lit on both adapters (as in Step
3). This indicates that your adapters are properly connected to
each other.
DHP-600AV
DHP-600AV
DHP-600AV
DHP-600AV
Simple Connect Button
Simple Connect Button
6
