12
D-Link DHP-209AV User Manual
Section 2 - Installation
5. Adding More Adapters (Optional)
If you would like to add more than two adapters, press the
Simple Connect
button of the additional adapter for no more than three seconds. The
Power LED will start blinking after you release the button. Then press the
Simple Connect
button of any adapter in your existing PowerLine network
for no more than two seconds. The Power LED will start blinking after you release the button.
Note:
Both
Simple Connect
buttons must be pressed within two minutes.
After performing the above Push Button Security Setup steps, your PowerLine network will be securely configured using the same network encryption
key for all PowerLine adapters.
