DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide
5
DES-3700-12G
•
Eight 1000M SFP ports
•
Four 10/100/1000BASE-T ports located to the right
•
One female DCE RS-232 DB-9 console port
•
One 10/100Base-Tx out of band management port
•
One RJ-45 alarm port
•
LEDs for AC Power, DC Power, Console, Management, Fan, Master, Link/Act/Speed for each port
•
Grounding post
•
Fan module
•
Power module consisting of the following components:
−
AC power connector (power cord provided, supports voltage 100~240 VAC at 50~60 Hz 1.5A Max)
−
AC power Switch
−
DC power connector (supports voltage 48VDC 1.6A Max)
−
DC power switch
CAUTION:
The handles on the power and fan modules should only be used to replace the modules in
the event of a hardware failure. Do not use the power module handle to lift the Switch.
Figure 1- 2. Front Panel View of the DGS-3700-12G switch
LED Indicators
The Switch supports LED indicators for Power, Console, Management, Fan and Port LEDs. The following shows the
LED indicators for the DGS-3700 Series along with an explanation of each indicator. LEDs and their corresponding
meanings are displayed below.
Figure 1- 3. LED Indicators on DGS-3700-12 switch
Figure 1- 4. LED Indicators on DGS-3700-12G switch
Summary of Contents for DGS-3700 Series
Page 60: ......
