D-Link DGS-3224SR Layer 2 Gigabit Ethernet Switch
62
Traffic Segmentation
Traffic segmentation is used to limit traffic flow from a single port to a group of ports on either a single switch
(in standalone mode) or a group of ports on another switch in a switch stack. This method of segmenting the flow
of traffic is similar to using VLANs to limit traffic, but is more restrictive. It provides a method of directing
traffic that does not increase the overhead of the Master switch CPU.
Figure 10-8. Traffic Segmentation Table
Click on the
Setup
button to open the
Setup Forwarding ports
page, as shown below.
Figure 10-9. Setup Forwarding Ports