DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
388
Parameter
Description
PDU Priority
Select the 802.1p priority to be set in the transmitted LBMs here. If not
specified, it uses the same priority as the CCMs sent by the MA. The range is
from 0 to 7. Select the
None
option to use the default setting.
Click the
Apply
button to accept the changes made.
CFM Linktrace Settings
This window is used to display and configure the CFM link-trace settings.
To view the following window, click
OAM > CFM > CFM Linktrace Settings
, as shown below:
Figure 10-15 CFM Linktrace Settings Window
The fields that can be configured in
CFM Linktrace Settings
are described below:
Parameter
Description
MAC Address
Enter the destination MAC address here.
MEPID
Enter the MEP ID here used to initiate the link-trace feature. The range is from
1 to 8191.
MA Name
Enter the MA name here. The name can be up to 22 characters long.
Domain Name
Enter the MD name here. The name can be up to 22 characters long.
TTL
Enter the link-trace message’s TTL value here. The range is from 2 to 255. The
default value is 64.
PDU Priority
Select the 802.1p priority to be set in the transmitted LBMs here. If not
specified, it uses the same priority as the CCMs sent by the MA. The range is
from 0 to 7. Select the
None
option to use the default setting.
Click the
Apply
button to accept the changes made.
The fields that can be configured in
Find and Clear CFM Linktrace
are described below:
Parameter
Description
MEPID
Enter the MEP ID here. The range is from 1 to 8191.
MA Name
Enter the MA name here. The name can be up to 22 characters long.
Domain Name
Enter the MD name here. The name can be up to 22 characters long.
Click the
Find
button to locate a specific entry based on the information entered.
Summary of Contents for DGS-3130 Series
Page 1: ......
