Information in this document is subject to change without notice.
© 2021 D-Link Corporation. All rights reserved.
Package Contents
Open the shipping carton of the Switch and carefully unpack its contents. The carton
should contain the following items:
One DGS-3130-54TS switch
One AC power cord
One console cable (RJ-45 to RS-232)
One rack mounting kit (two brackets and screws)
Four rubber feet with adhesive backing
One power cord retainer set
One Quick Installation Guide
LEDs
LED
Status
Description
Power
Solid green
Device power on.
Light off
Device power off.
Console
Solid green
Console on.
Light off
Console off.
MGMT
Solid green
Link presents but not sending or receiving data.
Blinking
Port is sending or receiving data.
Light off
No link or port was administratively shutdown.
USB
Solid green
USB disk is connected.
Blinking
Data is transmitting.
Light off
No device is connected.
RPS
Solid green
RPS in using.
Light off
RPS off.
Fan Error
Solid yellow
The fan has run time failure and is brought offline.
Light off
All fans work normally.
Stack ID
Capable 1-8
The Box ID is assigned in the stack.
When the box becomes stacking master, the box ID and «H»
will be shown by turn. That is boxID -> H -> boxID -> H … off.
Link/Activity/Speed
(per 10/100/1000Base-T
port)
Solid green
When there is a secure 1000 Mbps connection at the port.
Blinking green
When there is reception or transmission occuring at the port.
Solid amber
When there is a secure 10/100 Mbps connection at the port.
Blinking amber
When there is reception or transmission occuring at the port.
Light off
No link.
Link/Activity/Speed
(per 10GBase-T port)
Solid green
When there is a secure 10 Gbps connection at the port.
Blinking green
When there is reception or transmission occuring at the port.
2
