manualshive.com logo in svg

D-Link DGS-1510 Series, Reference Manual, Page: 138 / 711

Share
Download
D-Link DGS-1510 Series Reference Manual Download Page 138

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide 

135 

Parameters 

SOURCE-URL 

Specifies the source URL for the source file to be copied. It must be 
one of the following keywords. 

buffer:

 Specifies to copy the debug buffer information. 

error-log:

 Specifies to copy the error log information. 

tech-support:

 Specifies to copy the technical support information. 

LOCATION 

Specifies the IPv4 or IPv6 address of the TFTP server. 

Default 

None. 

Command Mode 

Privileged EXEC Mode. 

Command Default Level 

Level: 15. 

Usage Guideline 

None. 

Example 

This example shows how to copy debug buffer information to a TFTP server (10.90.90.99). 

Switch# debug copy buffer tftp: //10.90.90.99/abc.txt 
 
Address of remote host [10.90.90.99]? 
Destination filename [abc.txt]? 
 Accessing tftp://10.90.90.99/abc.txt... 
Transmission starts... 
Finished network upload(65739) bytes. 
 
Switch# 

 

 

14-5  debug clear buffer 

This command is used to clear the debug buffer. 

 

debug clear buffer 

 

Parameters 

None. 

Default 

None. 

Command Mode 

Privileged EXEC Mode. 

Command Default Level 

Level: 15. 

Usage Guideline 

Use this command to clear the debug buffer information. 

Example 

Summary of Contents for DGS-1510 Series








































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments