DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
16
Figure 1–13 Side panels view of a DGS-1510-20 Switch
Figure 1–14 Side panels view of a DGS-1510-28 Switch
Figure 1–15 Side panels view of a DGS-1510-28P Switch
Figure 1–16 Side panels view of a DGS-1510-52 Switch
Smart Fans
The DGS-1510 Series Switches includes
smart fans
that will automatically change their speed
depending on the internal temperature detected by the sensors built-in the Switch’s hardware. These
smart fans support three states. They can either be
off
, running at a
low speed
, or running at a
high
speed
.
The following will explain when these fans will toggle between low and high speeds:
•
DGS-1510-20:
When the internal temperature, detected by the sensor,
rises above 47°C
, the fan
will automatically change to the
high speed
. When the internal temperature, detected by the
sensor,
falls below 43°C
, the fan will automatically change to the
low speed
.
•
DGS-1510-28:
When the internal temperature, detected by the sensor,
rises above 48°C
, the fan
will automatically change to the
high speed
. When the internal temperature, detected by the
sensor,
falls below 43°C
, the fan will automatically change to the
low speed
.
