D-Link DGS-1224T - Web Smart Switch, Manual

Page: 30 / 64

24
Login
Before you configure this device, note that when the Web Smart
Switch is configured through an Ethernet connection, make sure the
manager PC must be set on same the
IP network . For example, when
the default network address of the default IP address of the Web Smart
Switch is
192.168.0.1 , then the manager PC should be set at
192.168.0.x (where x is a number between 2 and 254), and the default
subnet mask is 255.255.255.0.
Open Internet Explorer 5.0 or above Web browser.
Enter IP address
http://192.168.0.1 (the factory-default IP address
setting) to the address location.
Figure 13.
Or through the Web Management Utility, you do not need to
remember the IP Address, select the device shown in the Monitor List
of the Web Management Utility to settle the device on the Web
Browser.
When the following dialog page appears, remain enter the default
password
"admin" and press Login to enter the main configuration
window.
Figure 14.