4 Configuration
D-Link Web Smart Switch User Manual
36
D-Link Discover Protocol State:
Enable or disable the Discover Protocol state. The default value is
enabled.
D-Link Discover Protocol Report Timer (Seconds):
Configure the report timer of D-Link Discover Protocol
in seconds. The values are 30, 60, 90, 120 or Never.
Click
Apply
to implement changes made.
DDP Port Setting:
From Port / To Port:
Specify the range of ports to be configured for D-Link Discover Protocol of the Switch.
State:
Specify to enable or disable the D-Link Discover Protocol state for the specified ports.
Click
Apply
to implement changes made.
VLAN > 802.1Q VLAN
A VLAN is a group of ports that can be anywhere in the network, but communicate as though they were in
the same area.
VLANs can be easily organized to reflect department groups (such as R&D, Marketing), usage groups (such
as e-mail), or multicast groups (multimedia applications such as video conferencing), and therefore help to
simplify network management by allowing users to move devices to a new VLAN without having to change
any physical connections.
The IEEE 802.1Q VLAN Configuration page provides powerful VID management functions. The original
settings have the VID as 1, no defaul
t name, and all ports as “Untagged”
Rename:
Click to rename the VLAN group.
Delete VID:
Click to delete the VLAN group.
Add New VID:
Click to create a new VID group, assigning ports from 01 to 28 as
Untag
,
Tag
, or
Not
Member
. A port can be untagged in only one VID. To save the VID group, click
Apply.
You may change the name accordingly to the desired groups, such as R&D, Marketing, email, etc.
Figure 4.35 – Configuration > 802.1Q VLAN
Figure 4.36 – Configuration > 802.1Q VLAN > Add VLAN
VLAN > 802.1Q VLAN PVID
The 802.1Q VLAN PVID setting allows user to configure the PVID for each ports. Click
Apply
to implement
changes made.
