background image

 

D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing 

requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to 

pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in 
accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. 

 
What Is Not Covered: 

This limited warranty provided by D-Link does not cover: Products, if in D-Link’s judgment, have 

been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of 

reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the 

model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and 

removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the 

product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and 

cosmetic damage;  Any hardware, software, firmware or other products or services provided  by anyone other than D-

Link; Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, 

the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.  Repair by anyone 
other than D-Link or an Authorized D-Link Service Office will void this Warranty. 

 
Disclaimer of Other Warranties: 

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS 

PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY 

WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY 

IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF 

SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER 

THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND 
PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. 

 
Limitation of Liability: 

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY 

CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF 

THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR 

CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR 

PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR 

COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA 

CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY 

SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF 

ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 

DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, 

REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT.  THE MAXIMUM LIABILITY OF 

D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE 

WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU 
OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. 

 
Governing Law

:  This Limited Warranty shall be governed by the laws of the state of California. Some states do not allow 

exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so 

the foregoing limitations and exclusions may not apply. This limited warranty provides specific legal rights and the 
product owner may also have other rights which vary from state to state.

 

 

Summary of Contents for DGS-1016TL

































Reviews: