D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network..., User Manual

Page: 10 / 53

D-Link DGE-560T User Manual
1. After you have installed the network adapter in your computer, boot Windows 2000. Windows 2000 detects the
DGE-560T network adapter as “Ethernet Controller” during the boot operation. The window “Found New Hardware Wizard”
is displayed.
2. Click
NEXT
. In the same window the menu “Install Hardware Device Drivers” is displayed.
3. Select the check box
Search.for.a.suitable.driver.for.my.device.(recommended)
.
4. Click NEXT . The menu “Locate Driver Files” is displayed.
5. Select the source from which the driver is to be installed.
6. Type the path to the driver.
7. Click OK .
8. Click
NEXT
. The menu “Driver Files Search Results” is displayed, listing the found driver and its location.
9. To install the driver, click NEXT . In case the driver does not have a Microsoft Digital Signature yet, the window “Digital
Signature Not Found” is displayed.
10. To continue the installation, click YES . The window “Completing the Found New Hardware Wizard” is displayed.
11. Click FINISH to complete the installation.
Windows
®
2000
Alternate Installation
Note:
If you’ve installed the adapter before installing the driver, please continue with the following procedures.