7
Connecting the Network Cable
Four pair of Cat.5 UTP or STP cable with RJ-45 connector is
required for the 32-bit PCI 10/100/1000Mbps NWay Gigabit
Ethernet Card. You can use standard or crossover cable to connect
the switch MDI-X or MDI-II port, because the 32-bit PCI
10/100/1000Mbps NWay Gigabit Ethernet Card will adjust the
correct signal automatically.
Software Installation
For installation with Operating systems Window 98SE,
98 ME and Win2000
•
Install the DGE-500T to a open PCI slot.
•
Turn on the computer.
•
Windows will automatically detect new hardware, which
will prompt for the driver location.
•
Select floppy drive for the driver location.
•
Select finish to complete driver installation.
•
Check device manager for proper loading of adapter.
•
Right click network properties to check configuration.
•
Reboot.
Summary of Contents for DGE-500T
Page 19: ......
