![background image](http://html1.mh-extra.com/html/d-link/dg-104s/dg-104s_user-manual_3121299027.webp)
DG-104S VoIP Station Gateway
21
After the settings have been saved to NV-RAM, they will become the default settings for the device, and they will
be used every time it is powered on, reset or rebooted. The only exception to this is a factory reset, which will clear
all settings and restore them to their initial values, which were present when the device was purchased.
$
Before performing a Factory Reset, be absolutely certain that this is what you want to do. Once the reset is done,
all of the device’s settings stored in NV-RAM will be erased and restored to values present when the device was
purchased.
Note: After performing the Factory Reset, make sure to redefine the IP settings for the device in the IP
Configuration menu. Then perform a Restart System on the device. After these three procedures are
performed, your Factory Reset is complete.
To perform a Factory Reset, use the arrow keys to highlight the fifth menu item on the Boot Menu, Factory Reset,
and press <Enter>. The Factory Reset screen will be displayed:
Summary of Contents for DG-104S
