![background image](http://html1.mh-extra.com/html/d-link/dg-102s/dg-102s_quick-install-manual_3113135002.webp)
Starting with the
WAN
port, connect the Cable or DSL modem to the
DG-102S WAN port using an Ethernet cable. Next, connect the PC or
switch to the
LAN
port with another Ethernet cable.
Then, connect
your regular analog telephone(s) directly into either of the two
Phone
ports using RJ-11 phone cable. (Connect the
Line
port to a standard
telephone wall outlet for PSTN Life Line Support)
Finally, plug one end of the RS-232 console cable to the DG-102S
Diagnostic RS-232
port and the other end to an available serial port
on your computer.
(
Do Not plug in the power adapter yet!)
On the same computer where the RS-232 console cable is connected
to, open up a HyperTerminal screen by clicking on
Start
->
Programs
->
Accessories
->
Communications
->
HyperTerminal
Summary of Contents for DG-102S
Page 12: ...Building Networks for People...