- 11 -
2.
If you are experiencing dropped frames while capturing video with Ulead VideoStudio
or any other video capturing software, then your hard driver may not be capable of the
speed necessary to transfer the high amounts of data required of digital video. If your
hard drive speed is under 7200 rpm you can change your hard drive configuration to
tweak the performance. Follow the steps below:
Go to
Console
->
System
->
System Manager
->
Floppy
->
Generic IDE DISK
TYPEXX
->
Content
->
Configure. Put a check-mark on DMA
. This will improve hard
disk Read/Write performance.
3. DFW-500 installed and Hardware cannot detect the card or device
Problem
Trouble shooting
System unstable, Driver, Registry conflict,
Memory Allocation error.
Format Hard disk or reinstall OS
Driver not detected, Driver incorrect
Remove or disable previous Driver
DFW-500 1394 Card not seated firmly
Re-insert the Card
PCI Slot IRQ conflict
Change to an available PCI Slot
4.
Capture Image error
Problem
Trouble Shooting
Hardware resource insufficiency, RAM
size not enough
Expand memory size
Too many programs running . System
resources are exhausted
Close applications or unused windows
Memory management error
Remove unsuitable memory manager
software
Hard disk space insufficienc y
Remove unnecessary file or replace a
sufficiency space hard disk
When capture image simultaneous use of
other 1394 Device
Remove other 1394 device for Camcorder
only
Connector connect problem
Reconnect connector
5. Archive processed image data to Camcorder problem
Problem
Trouble Shooting
System requirement insufficienc y
Expand insufficienc y portion
