8
D-Link DFE-690TXD Quick Install Guide
Configure Your Adapter
If you are not using a DHCP capable gateway/router, or you need to
assign a static IP address, please follow the steps below.
Step 1:
Windows
®
2000: Click on
Start
>
Settings
>
Control Panel >
Network Connections.
Windows XP: Click on
Start
>
Control Panel > Network Connections.
Windows
®
7/Vista
®
: Click on
Start
>
Control Panel > Network
and Internet > Network and Sharing Center > Manage Network
Connections.
Step 2:
Right-click on the
Local Area Connection,
which represents your
D-Link network adapter, and select
Properties
.
Step 3:
Highlight
Internet Protocol (TCP/IP)
and click
Properties
.
Step 4:
Click
Use the following IP address
and enter an IP address that
is on the same subnet as your network or the LAN IP address on
your router.
Example:
If the router’s LAN IP address is 192.168.0.1, make your
IP address 192.168.0.X where X is a number between 2 and 99.
Make sure that the number you choose is not in use on the network.
Set Default Gateway the same as the LAN IP address of your router
(192.168.0.1).
