manualshive.com logo in svg

D-Link DFE-650TXD, User Manual

Share
Download
D-Link DFE-650TXD User Manual Download Page 32

NETWORKING BASICS

Sharing Printers 

K. Choose "Network printer" and click "Next."

L. Now you will identify the location of the Network Printer. 

If you know the name of the computer and the share name of
the printer, you can type it into the "Network path or queue 
name:" box.  However, it is easier to click the "Browse" button
and navigate to the location of the printer.  Click "OK" when 
you have selected the desired printer.  Finish the installation by
continuing the "Add Printer Wizard" normally. 

M. You may now use the Network Printer as if it was connected

directly.  Note: the computer that the printer is connected to 

must be on to use the printer.  If you find this inconvenient, 

devices known as Network Print Servers are available from 

D-Link including the DP-301 and DP-101P.  A Network Print 

Server would allow you to directly connect your printer to 

your network without worrying about which computer is 'on'.

27

Summary of Contents for DFE-650TXD



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands