5 Installing the D-Link DFE-500TX ProFAST PCI Ethernet Adapter
Microsoft Windows NT 4.0 Workstation
5 Installing the D-Link DFE-500TX ProFAST PCI Ethernet
Adapter
Microsoft Windows NT
4.0 Workstation
Connecting to a
Windows NT 3.51 Server
Requirements
•
HP Vectra with Windows NT 4.0 Workstation.
•
D-Link DFE-500TX ProFAST 10/100 PCI Ethernet adapter and driver
disk version 971201.
•
Driver: DLKPCI.SYS, version 4.22.1
•
Microsoft Windows NT 4.0 Workstation media.
•
Microsoft Windows NT Service Pack 4 media.
•
Microsoft Windows NT 3.51 Server system that supports NetBEUI,
NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network
protocols.
Device Configuration
Procedure
1
With the HP Vectra turned off, install the D-Link DFE-500TX network
adapter into a PCI slot.
2
Connect network cable media to the D-Link DFE-500TX network adapter.
3
Power on the system and log into Windows NT with administrator
privileges.
4
Open the “Network Properties” window and agree to install “Windows NT
Networking”.
5
With “Wired to the Network” checked, click on “Next”.
6
Click on the option to “Select from list” then on “Have Disk”.
7
Insert the D-Link DFE-500TX driver disk into the floppy drive.
Device Configuration
Vectra Vli8
Vectra VEi7
Vectra VEi8
Interrupt
10
03
10
I/O Address
1400
DC00
E400
Summary of Contents for DFE-500TX ProFAST 10/100
Page 1: ...D Link DFE 500TX ProFAST 10 100 PCI Ethernet Adapter Installation Guide ...
Page 33: ......
Page 34: ......
