Written by: Simon Hsu
Dept. Technical Support
Updated: March 23, 2001
Press RESET SWITCH TO START UPDATE to initiate the update
sequence.
Restart the switch. Check the version of PROM code. is it the correct
version you want to update?
Update the Runtime code:
Modify the configure file (25.cfg) for RunTime code updating
Specify the directory path and image file name for RunTime code.
Save your modification and Enable your TFTP server.
Enter console program; select
Update Firmware and Configuration
Files
in the main menu.
Set the Software Update Mode to “Network”.
Specify the IP address of your TFTP server.
In the Configuration File field, Set Use Config Files to “Enable”
In File Name field, specify the path and file name of config file. The
following screen appears:
#Code_type=PROM
#Image_file="d:\des6000\6000prom.
b13
"
Code_type=RUNTIME
Image_file="d:\des6000\6000run.
b41
"
#Code_type=CONFIG
#Image_file="g:\d-link\des-
60
~1\basic_25.bc"
