DES-3550 Layer 2
Fast Ethernet Switch User’s Guide
99
Figure 6- 48. Access Rule Configuration window (Ethernet).
To set the
Access Rule
for
Ethernet
, adjust the following parameters and click
Apply.
Parameters
Description
Profile ID
This is the identifier number for this profile set.
Mode
Select
Permit
to specify that the packets that match the access
profile are forwarded by the Switch, according to any additional rule
added (see below).
Select
Deny
to specify that packets that do not match the access
profile are not forwarded by the Switch and will be filtered.
Access ID
Type in a unique identifier number for this access. This value can be
set from 1 – 50.
Type
Selected profile based on Ethernet (MAC Address), IP address, or
Packet Content Mask. Ethernet instructs the Switch to examine the
layer 2 part of each packet header. IP instructs the Switch to examine
the IP address in each frame’s header. Packet Content Mask
instructs the Switch to examine the packet header.
Priority(0-7)
Select this option to instruct the Switch to use the 802.1p priority
value entered in the adjacent field for packets that meet the criteria. A
number between 0, the lowest priority, and 7, the highest priority, can
be entered.
Vlan Name
Allows the entry of a name for a previously configured VLAN.
Source Mac
Source MAC Address - Enter a MAC Address for the source MAC
address.
Destination Mac
Destination MAC Address - Enter a MAC Address mask for the
destination MAC address.