D-Link DES-3250TG, Reference Manual

Page: 90 / 204

DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
90
config stp
list. The default cost for a 1000 Mbps
port is 4, a 100 Mbps port is 19, and for
a 10 Mbps port the default cost is 100.
priority <value 0-255> − A numeric
value between 0 and 255 that is used in
determining the root and designated
port in an STP port list. The default is
128, with 0 indicating the highest
priority.
state [enabled/disabled]
−
Allows STP to
be enabled or disabled for the ports
specified in the port list. The default is
disabled.
maxage <value 6-40>
−
The maximum
amount of time (in seconds) that the switch
will wait to receive a BPDU packet before
reconfiguring STP. The default is 20
seconds.
hellotime <value 1-10>
−
The time interval
between transmission of configuration
messages by the root device. The default is
2 seconds.
forwarddelay <value 4-30>
−
The maximum
amount of time (in seconds) that the root
device will wait before changing states. The
default is 15 seconds.
priority <value 0-65535>
−
A numerical
value between 0 and 65535 that is used in
determining the root device, root port, and
designated port. The device with the