manualshive.com logo in svg

D-Link DES-1316 - Switch, Manual, Page: 13 / 57

Share
Download
D-Link DES-1316 - Switch Manual Download Page 13

 

13

Connecting Network Cable 

The Switch supports 16 10/100M Ethernet ports and Port 1 ~ 8 are 
PoE Enable ports. These PoE ports will be automatically activated 
when a compatible terminal is identified. The Switch will supply 
power through the Ethernet port to the connected PoE device. 

For Legacy devices that are not yet compatible, the PoE port will not 
offer the power to these devices. This feature allows users to freely 
and safely mix legacy and Power over LAN compatible devices on 
their network. 

The Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and 
it runs both in half- and full- duplex mode using two pairs of Category 
5 cables.  

These RJ45 ports are Auto-MDI type port. The Switch can auto 
transform to MDI-II or MDI-X type, so you can just make an easy 
connection that without worrying if you are using a standard or 
crossover RJ45 cable. 

AC Power  

The Switch uses the AC power supply 100-240V AC, 50-60 Hz. The 
power switch is located at the rear of the unit adjacent to the AC 
power connector and the system fan. The Switch’s power supply will 
adjust to the local power source automatically and may be turned on 
without having any or all LAN segment cables connected. 

Summary of Contents for DES-1316 - Switch


























































Reviews:

No comments