D-Link Web Smart Switch User Manual
Power Over Ethernet
“Power Over Ethernet ” -> “POE Configuration” -> “System Level“ ->
“System PoE Operation”
Disable and Apply will stop all POE activity of this Switch device.
Default of
“
System PoE Operation” is Enable (of course, this is a POE Switch, isn’t
it?)
“Power Over Ethernet ” -> “POE Configuration” -> “System Level“ ->
“System Max PoE Power Budget”
User can define the POE power budget of the Switch device here. Note that POE
power budget of DES-1100-06MP is 80 Watt, which is the Maximum power for POE
usage.
“Power Over Ethernet ” -> “POE Configuration” -> “Port level” ->
“Status”
If user want to disable Power Over Ethernet function of any specific port, set it
here.
“Power Over Ethernet ” -> “POE Configuration” -> “Port level” ->
“Priority”
-
“Priority” setting (High, Middle, Low) decides the port’s priority of feeding
power to PD.
This setting takes effect only upon the Switch device power-on.
-
If there are several ports share the same priority, port number takes over the
6
