D-Link DE-528CT, Installation Manual

Page: 12 / 42

DE-528CT Ethernet Adapter / User s Guide
2-2 Introduction
Two LED indicators: Active, Link.
Drivers for all popular operating systems.
FCC class B and CE Marking Certification.
General steps
to set up/configure a DE-528CT card
For a DE-528CT without Boot
ROM
1. Install DE-528CT card and connect it to a network cable.
2. Run HELP.EXE on the DE-528CT software diskette to view the related
installation instructions.
3. Run INSTALL.EXE on the DE-528CT software diskette to copy a
specific driver.
4. If necessary, modify files according to installation instructions.
5. Restart the computer [Optional].
6. If the DE-528CT doesn t function properly, run SETUP.EXE on the DE-
528CT software diskette to locate the problem.
For a DE-528CT with Boot ROM
1. Install the DE-528CT card and connect it to a network cable.
2. Run HELP.EXE on the DE-528CT software diskette to view installation
instructions.
3. Run SETUP.EXE on the DE-528CT software diskette to configure the
card and the Boot ROM.
4. Restart the computer.
5. If the DE-528CT doesn t function properly, run SETUP.EXE on the DE-
528CT software diskette to locate the problem.
New or confused users should refer back to these general steps if necessary
And since most customers use the DE-528CT card without Boot ROM, the
detailed instructions on how to install the DE-528CT card without Boot
ROM will be described in the following chapters..