D-Link Technical
Support – How to connect the DCS-942L wirelessly.
Page
8
of
8
11. Check the rear panel of the DCS-942L and ensure that the power LED is green, provided it is green you
may now disconnect the Ethernet cable from the rear panel of your DCS-942L.
NOTE: When you disconnect the Ethernet cable the power LED will turn red, then come green again within
a few seconds.
12. You will know that your connected wirelessly as you should also be able to click on the other menu's in
the DCS-942L Web Configuration and when viewing the Live Video menu, moving objects should also be
visible in the DCS-942L Web Configuration.
~ End of Document ~
