Technical Support Setup Procedure
Page 2 of 4
Step 5:
Click on
Advanced Settings.
Step 6:
Open the Advanced Settings window.
Step 7:
Copy down the IP address of the DCS-936L show in the URL bar.
Page 1: ...setup NTP Server for DCS 936L Step 1 Connect the power of the camera and power on Step 2 Open Internet Explorer and enter http sg mydlink com Step 3 Enter mydlink registered username and password Clic...
Page 2: ...Technical Support Setup Procedure Page 2 of 4 Step 5 Click on Advanced Settings Step 6 Click on Open the Advanced Settings window Step 7 Copy down the IP address of the DCS 936L show in the URL bar...
Page 3: ...plorer and enter the IP address of the camera that you had copy down on the URL bar Step 9 Enter the camera user name and password that had set during setting up of the camera Click on OK Step 10 Clic...
Page 4: ...upport Setup Procedure Page 4 of 4 Step 11 Under TIME AND DATE a Check on the box beside Synchronize with NTP Server b Select either ntp dlink com tw or ntp1 dlink com as NTP Server c Click on Save Se...
