26
D-Link DCS-7000L User Manual
Section 4: Configuration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure your new
D-Link Camera and connect the camera to the Internet.
Note that this wizard will
not register your camera with mydlink.com
.
Click
Next
to continue.
Select
Automatic IP Address
if you want your DHCP server (usually enabled on
your router) to assign the camera its IP settings. If you want to manually assign the
IP settings, select
Static IP Address
and enter the following details:
Enter an IP address for your camera.
Enter the subnet mask of your network.
Enter the default gateway address. This is usually the IP address
of your router.
Enter the primary DNS server’s IP address. This is usually the IP
address of your router.
Enter the secondary DNS server’s IP address. This is optional.
IP Address:
Subnet Mask:
Default
Gateway:
Primary DNS:
Secondary DNS:
If you are required to connect using PPPoE, select
Enabled
and enter the Username
and Password for your PPPoE connection. Only select this option if your camera is
directly connected to your broadband modem. If it is on a network with a router or
gateway, do not select this option.
Click
Next
to continue.
