13
D-Link DCS-6500LHV2 User Manual
Section 3 - mydlink
1
Device Name
Tap to change the device’s name.
2
Privacy Mode
Tap to enable. Privacy mode will disable the camera feed.
3
Motion Settings
Tap to set the Motion area and sensitivity settings.
4
Point to Go
This photo is what you will see when you control your viewpoint in the camera's Point
to Go live-view. Tap
Scan
to scan a new panorama.
5
Auto Home
Enable this to automatically return your camera to the set 'Home Point' after 60 seconds
of inactivity.
6
Storage
Tap to change the video clips storage location from the microSD card to the cloud. You
can also subscribe to mydlink Cloud from here and view your current subscription plan.
7
Camera Microphone
Tap to enable or disable picking up sound near your camera in live view and recordings.
8
Night Vision
Tap to change night vision detection to
On
,
Off
or
Auto
.
9
Anti-Flicker
Reduces flicker in the video. Tap
50 Hz
or
60 Hz
depending on the frequency of your
lights.
10
Invert Image
Enable this to invert the camera view.
11
Pan-Tilt Control
Choose whether to control your camera's Point to Go live-view pan-tilt control by
swiping or tapping.
12
Status LED
Disabling this will turn off the LED until you turn it back on.
13
Designated Contact
Tap here to add, remove, or edit designated contacts that appear in the rich notification.
14
Wi-Fi
This displays the current wireless network.
Note:
Tap
Remove Device
or press
the reset button if you want to change wireless networks.
15
Time Zone
Select the time zone to calibrate your device to.
16
Firmware
This displays the installed version of the firmware on your device. Tap to enter the
update settings. You can choose the most suitable time for automatic updates.
17
MAC ID
Identifies the device for support issues.
18
Restart Device
Tap this button to restart the device.
19
Remove Device
Tap this button to disconnect this device from your mydlink account.
2
3
4
5
6
7
8
9
10
11
13
14
12
18
1
15
16
17
19
