background image

54

D-Link DCS-6210 User Manual

Section 4: Configuration

Maintenance

Device Management

You may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera. 

You may also use this section to create a unique name and configure the OSD settings for your camera.

Admin Password Setting:

Add User Account:

User Name:

Password:

User List:

Camera Name:

Enable OSD:

Label:

Show Time:

Set a new password for the administrator’s account.

Add new user account.

The user name for the new account.

The password for the new account.

All the existing user accounts will be displayed here. You 

may delete accounts included in the list, but you may 

want to reserve at least one as a guest account.

Create a unique name for your camera that will be added 

to  the  file  name  prefix  when  creating  a  snapshot  or  a 

video clip. 

Select  this  option  to  enable  the  On-Screen  Display 

feature for your camera.

Enter a label for the camera, which will be shown on the 

OSD when it is enabled.

Select this option to enable the time-stamp display on 

the video screen.

Summary of Contents for DCS 6210
































































Reviews: