D-Link DCS?6010L, Quick Installation Manual

Page: 4 / 80

DCs-6010l
4
EN
G
LI
S
H
WPS SETUP
Alternatively, you may create a WPS connection if your router or access point supports WPS. To create
a WPS connection:
Step 1:
Press and hold the WPS button on the side of the camera for 5 seconds. The blue WPS status LED
will blink.
Step 2:
Press the WPS button on your wireless router or access point within 60 seconds. On some routers, you
may need to log into the web interface and then click an onscreen button to activate the WPS feature.
If you are not sure where the WPS button is on your router or access point, please refer to your router’s
user manual.
The DCS-6010L will automatically create a wireless connection to your router. While connecting, the
green LED will flash.
HArDWArE OvErvIEW
Power LED
mIC
WPS LED
micro SD Card
reset Button
WPS Button