27
D-Link DCS-6004L/DCS-6005L User Manual
Section 4: Configuration
Wireless Setup
(DCS-6005L Only)
This section allows you to set up and configure the wireless settings on your camera. After making any changes, click the
Save Settings
button to
save your changes.
Site Survey:
SSID:
Wireless Mode:
Channel:
Authentication:
Encryption:
Key:
Click the
Rescan
button to scan for available wireless
networks. After scanning, you can use the drop-
down box to select an available wireless network.
The related information (SSID, Wireless Mode, Channel,
Authentication, Encryption) will be automatically
filled in for you.
Enter the SSID of the wireless access point you wish
to use.
Use the drop-down box to select the mode of the
wireless network you wish to connect to. Infrastructure
is normally used to connect to an access point or
router. Ad-Hoc is usually used to connect directly to
another computer.
If you are using Ad Hoc mode, select the channel of
the wireless network you wish to connect to, or select
Auto.
Select the authentication you use on your wireless
network - Open, Shared, WPA-PSK, or WPA2-PSK.
If you use WPA-PSK or WPA2-PSK authentication, you
will need to specify whether your wireless network
uses TKIP or AES encryption. If you use Open or Shared
authentication, WEP encryption should be the setting.
If you use WEP, WPA-PSK, or WPA2-PSK authentication,
enter the Key (also known as password) used for your
wireless network.
