The Zero Configuration Setup will only work with a registered
Cloud Router and an active mydlink account. Your Cloud Router
will automatically assign your network settings (both wired and
wireless) to your camera, and add it to your mydlink account. If you
do not have a D-Link Cloud Router, skip to the
Easy Setup
section
on the next page.
Zero Configuration Setup
If using an Ethernet connection:
Connect the included Ethernet
cable to the Ethernet port located
on the back of the DCS-5029L and
connect it to your router.
Attach the power supply to the
power receptor located on the back
of the DCS-5029L and connect it to
a wall outlet or power strip. Power
is confirmed when the Power LED
is lit.
From any PC, open a web browser,
go to
http://www.mydlink.com
and log into your account. Once
mydlink detects your camera, a
notice will appear that there is a
new device detected. Click on your
camera from the
New Devices
list and then click
Yes
to add your
camera.
Your setup is complete!
1
2
3
DCS-5029L
If using a wireless connection:
Press and hold the
WPS
button
on the side of the camera for five
seconds. The blue WPS status LED
will start to blink. Then, press the
WPS
button on your Cloud Router
within two minutes.
4
