D-Link DCS-4703E, Quick Installation Manual

Page: 5 / 100

3
D-Link DCS-4703E Quick Installation Guide
3
E
N
G
LI
S
H
Configuring the Camera
Insert the DCS-4703E CD into your computer's CD-ROM drive to begin
the installation. If the Autorun function on your computer is disabled, or if
the D-Link Launcher fails to start automatically, click Start > Run . Type D:\
autorun.exe , where D: represents the drive letter of your CD-ROM drive.
Click on the D-Link Setup Wizard SE icon that
was created in your Windows Start menu ( Start >
D-Link > Setup Wizard SE ).
Click Setup Wizard and follow the instructions to
install the Setup Wizard.
The Setup Wizard will appear and display the MAC
address and IP address of your camera(s). If you
have a DHCP server on your network, a valid IP
Address will be displayed. If your network does not
use a DHCP server, the network camera's default
static IP 192.168.0.20 will be displayed.
Select your camera, then click the Wizard button to
continue.
Enter the Admin ID and password. When logging in
for the first time, the default Admin ID is admin with
the password left blank.
Click the checkboxes if you wish to change the
admin ID and password for the camera, and enter
the new ID and password you wish to use.
Click
Next to continue.
Select
DHCP
if your camera obtains an IP address
automatically from a DHCP server such as a router.
Select Static IP if you want to manually enter the IP
settings for the camera.
Click
Next to continue.