D-Link DCS-4605EV, Quick Installation Manual

Page: 8 / 23

D-Link DCS-4605EV Quick Installation Guide
8
E
N
G
LIS
H
Connect the power and Ethernet cables, or just the
Ethernet cable if you are using a PoE connection.
Loosen the adjustment screw on the side of the lens
assembly, then re-tighten it after adjusting the lens
assembly to the desired vertical angle. The camera
supports from 30
°
to 90
°
of tilt.
You can also adjust the pan within a -120 ° to 120 ° range by
rotating it clockwise or counter-clockwise.
When you are done adjusting the camera's angle, put the
inner cover back into place.
Note : The camera has a limited range of motion; if it stops
when you are adjusting it, do not attempt to rotate or tilt
the camera any further in that direction.
Re-attach the camera cover.
If you are mounting the camera to the ceiling,
use a
flathead screwdriver to remove the plastic hole cover from
the bottom of the base, then guide the cables through the
bottom.
Use the screws provided to mount the camera to the
ceiling.
120 o
Pan(Total 240
o
)
120
o
90 o
Tilt(Total 60
o
)
30 o
120
o
Pan(Total 240
o
)
120 o
90
o
Tilt(Total 60 o )
30 o