manualshive.com logo in svg

D-Link DCS-4201, User Manual, Page: 17 / 61

Share
Download
D-Link DCS-4201 User Manual Download Page 17

17

D-Link DCS-2103 User Manual

Section 3: Configuration

Live Video

This section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your 

language using the drop-down menu on the left side of the screen.

You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image.

Digital Input Indicator

This indicator will change color when a digital input 

signal is detected.

Motion Trigger 

Indicator

This indicator will change color when a trigger event 

occurs.

Note:

 The video motion feature for your camera must 

be enabled.

Recording Indicator

When a recording is in progress, this indicator will 

change color.

Control Pad

This control pad can be used to electronically pan, tilt, 

and zoom (ePTZ) within the camera's predefined view 

area, if one has been defined.

Auto Pan

Starts the automatic panning function.

Stop

Stops automatic panning.

Preset Path

Starts the camera's motion along the predefined path.

You may select a value between 0 and 64. 0 is the slowest 

and 64 is the fastest.

ePTZ Speed:

This option displays the status of the microSD card. If no 

microSD card has been inserted, this screen will display 

the message "Card Invalid."

This option displays the status of your I/O device if a 

device has been connected.

SD Status:

IO Status:

Summary of Contents for DCS-4201






























































Reviews:

No comments