D-Link DCS-3716 Quick Install Guide
5
EN
G
LIS
H
3. Hardware Installation
Basic Connection (without PoE)
Connect the camera to your switch or router via Ethernet cable.
Connect the supplied power cable from the camera to a power outlet.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet cable.
PoE will transmit both power and data over a single cable.
Note:
Once power has been established, the LED will turn red. When the device has
obtained an IP address and is accessible, the LED will turn green.
Summary of Contents for DCS-3716
Page 11: ...Notes ...
