![background image](http://html1.mh-extra.com/html/d-link/dcs-3511/dcs-3511_quick-install-manual_3215544005.webp)
D-Link DCS-3511/DCS-3530 Quick Install Guide
5
3. Hardware Installation
Basic Connection (without PoE)
Connect the camera to your switch or router via Ethernet cable.
Connect the supplied power cable from the camera to a power outlet.
Connection Using a PoE Switch
If you are using a PoE switch, connect the network camera via Ethernet cable.
PoE will transmit both power and data over a single cable.
Note:
Once power has been established, the LED will turn red. When the device has
obtained an IP address and is accessible, the LED will turn green.
Summary of Contents for DCS-3511
