44
D-Link DCS-3112 User Manual
Section 3 - Configuration
LAN Settings:
DHCP:
Static IP Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP:
Enable UPnP port
forwarding:
Enable PPPoE:
User Name:
Password:
HTTP Port:
RTSP port:
Settings for your local area network.
Select this connection if you have a DHCP server running on your network and would like a dynamic IP address to be updated
to your camera automatically.
You may obtain a static or fixed IP address and other network information from your network administrator for your camera. A
static IP address will ease you for accessing your camera in the future.
The fixed IP address.
The default value is “255.255.255.0.” Used to determine if the destination is in the same subnet.
The gateway used to forward frames to destinations in a different subnet. Invalid gateway settings may cause the failure of
transmissions to a different subnet.
Primary domain name server that translates names to IP addresses.
Secondary domain name server to backup the primary one.
Enable this setting to allow your camera to be configured as an UPnP device in your network.
Enable this setting to allow the camera to add port forwarding entries into the router automatically.
Enable this setting if you network is using PPPoE service.
The unique name to your account. You may obtain this information from your ISP.
The password to your account. You may obtain this information from your ISP.
The default value is 80.
The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number is 554.
