DCS-2630L
5
E
N
G
LI
S
H
mOuNTING THE CAmErA
Please refer to the steps below to assist you with mounting the camera. It is recommended that you
configure the camera before mounting.
1
Step 2:
Place the camera base where you want to position the camera and
use a pencil to mark the holes.
Step 3:
Depending on the material of the wall or ceiling, use proper tools to
drill four holes 25mm deep with a 6mm drill bit where you marked. If
the wall is made out of concrete, drill the holes first, then insert the
plastic anchors to support the screws.
Step 4:
Place the camera base over the holes that are in the wall. Make sure
to align the camera base holes with the holes in the wall. Use the
supplied screws to attach the camera to the surface of the wall.
2
6
Step 1:
Rotate the camera base cover counterclockwise, then lift it to expose
the mounting holes.
Step 5:
Reattach the base cover and turn it clockwise to lock it in place.
Step 6:
Adjust the angle of the camera as desired.
5
4
3
Summary of Contents for DCS-2630L
Page 1: ......