D-Link DCS-1201, Quick Installation Manual, Page: 6 / 96

D-Link DCS-1201 Quick Installation Guide
4
E
N
G
LI
S
H
Configuring the Camera
Insert the DCS-1201 CD into your computer's CD-ROM drive to begin the installation. If
the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start
automatically, click the Start button and type
D:\autorun.exe
(where D: represents the
drive letter of your CD-ROM drive) and press Enter.
Click on the D-Link Setup Wizard SE icon that was
created in your Windows Start menu ( Start > D-Link >
Setup Wizard SE ).
The Setup Wizard will appear and display the MAC
address and IP address of your camera(s). If you have a
DHCP server on your network, a valid IP Address will be
displayed. If your network does not use a DHCP server,
the network camera's default static IP
192.168.0.20
will be
displayed.
Select your camera, then click the
Wizard
button to
continue.
Click Setup Wizard and follow the instructions to install
the Setup Wizard.
Enter the Admin ID and password. When logging in for
the first time, the default Admin ID is admin with the
password left blank.
Click the checkboxes if you wish to change the admin ID
and password for the camera, and enter the new ID and
password you wish to use.
Click Next to continue.
Select DHCP if your camera obtains an IP address
automatically from a DHCP server such as a router.
Select
Static IP
if you want to manually enter the IP
settings for the camera.
Click
Next
to continue.