manualshive.com logo in svg

D-Link DCS-1000, Manual, Page: 7 / 83

Share
Download
D-Link DCS-1000 Manual Download Page 7

 

6 

 

monitoring purpose from Normal / Off / Dummy.  Please refer to the Web 
Configuration section for detailed information and usage.   

 

 
LAN LED 

The LAN LED is positioned on the far right side of the  DCS-1000’s lens 
while facing  DCS-1000.  It is located right of the Power LED. Steady orange 
confirms good connection to LAN connectivity. 
 
Dependent on the data traffic the LED will begin to flash to indicate  DCS-
1000  is receiving/transceiving from/to the LAN or network. 
 

Note

: 

There are three settings for the LAN LED to control the light illumination for 
monitoring purpose from Normal / Off / Dummy.   Please refer to the Web 
Configuration section for detailed information and usage.   
 

Rear Panel 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Network Cable Connector 

DCS-1000’s rear panel features an RJ-45 connector for connections to 
10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which 
should be Category 5 twisted-pair cable).  The port supports the NWay 
protocol, allowing  DCS-1000 to automatically detect or negotiate the 
transmission speed of the network. 

Network Cable  

Connector 

I/O Connector 

DC Power 

Connector 

Reset Button 

Summary of Contents for DCS-1000




















































































Reviews:

No comments