After the reset log in to the web interface of the DCH-G020 (http: //ip_of _the_DCH-G020) the
password is the pin on the bottom of the device.
Upload the latest firmware
ftp://ftp.dlink.de/dch/dch-g020/driver_software/DCH-G020_fw_reva_125b10_ALL_en_20160805.zip
Please add the DCH-G020 to your mydlink Account.
-----------------------------------------
-----------------------------------------
If you have Z-Wave devices connected to the DCH-G020 before the issue you have to do the
following for every Z-Wave device
-------------------------------------
Reset the Z-Wave Device
-------------------------------------
For every Z-Wave Device:
1.
Press the connect button on the DCH-G020
(LED flashing orange)
2.
Press the black pin on the back of the device four times in two seconds.
3.
And hold the pin at the four times until the device pulse red down.
The device will start flashing slowly red for the next two minutes; you have now two minutes to
reconnect the device with the DCH-G020 through the APP
