D-Link DBA-3621P, Quick Installation Manual

Page: 5 / 18

DBA-3621P Quick Installation Guide
3
ENGLISH
1. On an Internet-connected computer,
open a web browser and go to
www.nuclias.com.
2. Enter your D-Link Nuclias username and
password, then click
Login
.
3. Click on
Settings
>
Add device
.
4. Follow the onscreen instructions to set
up your device.
Manual Configuration
Note:
The management computer, DHCP server
and DBA-3621P must be in the same subnet.
If you are unable to connect to Nuclias Cloud,
you may need to manually configure the
DBA-3621P using its web user interface. Use
one of the following methods to access the
web user interface:
Connecting through Ethernet
1. Use an Ethernet cable to connect the
DBA-3621P to the management computer,
or to the switch or router the management
computer is connected to.
2. Open a web browser and type in the
default host name of the DBA-3621P in the
address bar and press
Enter
. The default
host name is
DBA-3621P-XXXX
where
XXXX
represents the last 4 characters
of the MAC address listed on the device
label located on the bottom of the device.
3. Log in to the administration user
interface. The default login information is
Username:
admin
Password:
admin
Connecting Wirelessly
1. Connect the management computer to
the default SSID of the DBA-3621P. The SSID
will be in the format
DBA-3621P-XXXX
where
XXXX
represents the last 4
characters of the MAC address listed on
the device label located on the bottom
of the device.
2. Open a web browser and type in the
default host name of the DBA-3621P in the
address bar and press
Enter
. The default
host name is
DBA-3621P-XXXX
where
XXXX
represents the last 4 characters
of the MAC address listed on the device
label located on the bottom of the device.
3. Log in to the administration user
interface. The default login information is
Username:
admin
Password:
admin
Mounting
Gland Sealing Nut Sealing
Figure 4: LAN Port Waterproof Enclosure
1. Connect an Ethernet Cable to the LAN(PoE)
port on the DBA-3621P. Use the LAN Port
waterproof enclosures to seal the ports.