D-Link Confidential
7
How to Set ADSL Alarm Profile
Users can use the following command to change the ADSL Alarm profile for specified DSL port. The
commands are listed as below.
Command
Description
$modify adsl line intf ifname dsl-* disable
Disable
(*: 0 ~ 23)
$modify adsl alarm profile ifname dsl-*
?
(*: 0 ~ 23, ?: means to get more information)
$modify adsl line intf ifname dsl-* enable
Enable
(*: 0 ~ 23)
How to Change VPI/VCI for Existing VCC
Users can use the following command to change VPI/VCI for existing VCC. The commands are listed as
below.
Command
Description
$modify atm vc intf ifname aal5-* disable
Disable
(*: Existing aal5 interface)
$modify atm vc intf ifname aal5-* vpi
<new-vpi> vci <new-vci>
(*: Existing aal5 interface)
$modify atm vc intf ifname aal5-* enable
Enable
(*: Existing aal5 interface)
How to Change Management IP Address for Existing Ethernet
Port
Users can use the following command to change management IP address for existing Ethernet port. The
commands are listed as below.
Command
Description
$modify aggr intf ifname aggr-0 ip <new-ip>
mask <new-mask>
Aggregation Ethernet
$modify ethernet intf ifname eth-* ip
<new-ip> mask <new-mask>
Non-Aggregation Ethernet
(*: 0 or 1)
How to Create more VC/EOA/Bridge
Users can use the following command to create more VC/EOA/Bridge. The commands are listed as below.
Command
Description
$create atm vc intf ifname aal5-* vpi <vpi>
vci <vci> lowif atm-* [vcmux/llcmux]
[fast/interleaved]
(*:0 ~ 23 is used for atm; 0~191 is used for aal5)
$create eoa intf ifname eoa-* lowif aal5-*
(*:0~191 is used for aal5 and eoa)
$create bridge port intf portid
<bridge-port-id> ifname eoa-*
(*:0~191 is used for eoa,; 1~192 is used for
<bridge-port-id>)
