DAP-600P
Quick Installation Guide
4.
IPv4 address assignment
. By default, the DHCP server of the device
in the access point mode is disabled (the
Disable
value is selected from
the
Mode of dynamic
IP
address assignment
drop-down list
on the
IPv4
tab
). As a rule, the DHCP server should be disabled when the
device is used in the access point mode. If you need to specify other
settings, change the parameters of the DHCP server.
5.
IPv6 address assignment
.
By default, the DHCPv6 server of the
device in the access point mode is disabled (the
Disable
value is selected
from the
Mode of dynamic
IPv6
address assignment
drop-down
list
on the
IPv6
tab
). As a rule, the DHCPv6 server should be disabled
when the device is used in the access point mode. If you need to specify
other settings, change the parameters of the DHCPv6 server.
6.
After specifying the needed parameters on the
Connections Setup /
LAN
page, click the
APPLY
button.
37
