D-Link DAP-3666, Quick Installation Manual

Page: 4 / 16

2
DAP-3666 Quick Installation Guide
ENGLISH
LAN2
LAN1(PoE)
Figure 3: Rear Connectors
# Connector Description
1 Grounding
Wire
Connector for the grounding wire.
2 Wall/Pole
Mount
Mount to connect to the
mounting plate on a wall or
a pole.
Table 3: Interface Description
Installation
The DAP-3666 can be powered using one of the
following two methods:
Using Power over Ethernet (PoE)
1. Use a standard Ethernet cable to connect
the LAN1(PoE) port on the DAP-3666
to a PoE power source device such as
an 802.3af or 802.3at PoE switch or PoE
injector.
2
Configuration
Using Nuclias Connect
The DAP-3666 is designed to be managed
through Nuclias Connect. Refer to the
Nuclias
Connect Manual
for detailed configuration
instructions.
Manual Configuration
Note:
D-Link recommends manually configuring
the device before mounting it. The management
computer, DHCP server and DAP-3666 must be
in the same subnet.
Use one of the following methods to access the
web user interface:
Connecting through Ethernet
1. Use an Ethernet cable to connect the
DAP-3666 to the management computer,
or to the switch or router the management
computer is connected to.
2. Manage the access point from a computer.
Enter
dap3666.local
in the address field
of your browser.
3. Log in to the administration user
interface. The default login information is
Username:
admin
Password:
admin
Connecting Wirelessly
1. Connect the management computer to
the default SSID of the DAP-3666, “
dlink
”.
2. Manage the access point from a computer.
Enter
dap3666.local
in the address field
of your browser.
1