DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Statistics
The pages of this section display data on the current state of the access point:
•
network statistics
•
IP addresses leased by the DHCP server
•
data on devices connected to the access point's network and its web-based interface, and
information on current sessions of these devices
•
addresses of active multicast groups
•
the routing table.
Network Statistics
On the
Statistics / Network Statistics
page, you can view statistics for all connections existing
in the system (WAN connections, LAN, WLAN). For each connection the following data are
displayed: name and state (when the connection is on, its name is highlighted in green, when the
connection is off, its name is highlighted in red), IP address and subnet mask, and volume of data
received and transmitted (with increase of the volume the units of measurement are changed
automatically: byte, Kbyte, Mbyte, Gbyte).
Figure 58. The
Statistics / Network Statistics
page.
To view detailed data on a connection, click the line corresponding to this connection.
Page
67
of 175
