26
D-Link DAP-2620 User Manual
Web User Interface
Performance
On the Performance Settings page the users can configure more advanced settings concerning the wireless signal and hosting.
Wireless Band
Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Wireless
Click the drop-down menu to enable or disable
the wireless function.
Wireless Mode
Click the drop-down menu to select the wireless
mode.
y
2.4GHz band supports:
Mixed 802.11b,
802.11g, 802.11n
;
Mixed 802.11b, 802.11g
;
and
802.11n Only
.
y
5GHz band supports:
Mixed 802.11n,
802.11a; 802.11a Only
;
802.11n Only
; and
Mixed 802.11ac
.
Please note that when backwards compatibility
is enabled for legacy (802.11a/g/b) clients,
degradation of 802.11n wireless performance is
expected.
Data Rate*
When
Wireless Mode
is set to
Mixed 802.11b,
802.11g
(for 2.4GHz) and
802.11a Only
(for
5GHz), click the drop-down menu to indicate
the base transfer rate of wireless adapters on
the wireless LAN. The AP will adjust the base
transfer rate depending on the base rate of
the connected device. If there are obstacles or
interference, the AP will derate the transfer rate.
Beacon Interval (40-500)
Beacons are packets sent by an access point
to synchronize a wireless network. Specify
a value in milliseconds. The default (100) is
recommended. Setting a higher beacon interval
can help to save the power of wireless clients,
while setting a lower one can help a wireless
client connect to an access point faster.
