1
D-Link DAP-590 User Manual
Section - Configuration
Select
Open System to communicate the key across the network.
Select
Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is
enabled, this option is not available.
Select
WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is
required.
Select
WPA-Enterprise to secure your network with the inclusion of a RADIUS server.
Select
802.1X if your network is using port-based Network Access Control.
Channel Width:
Authentication:
For more information about the different types of Authentication offered on the DAP-2590 and the respective settings
of each, please go to the first page of the “Authentication” explanations, which begins on page 23.
Allows selection of the channel width you would like to operate in.
20 MHz and Auto 20/40 MHz allow both 802.11n
and non-802.11n wireless devices on your network when the wireless mode is Mixed 802.11 b/g/n in 2.4� and Mixed
802.11 a/n in 5�. When the channel width is set to
Auto 20/40 MHz, then 802.11n wireless devices are allowed to
transmit data using 40 MHz.
Summary of Contents for DAP-2590 - AirPremier N Dual Band PoE Access...
Page 1: ......